Fujitsu Siemens Computers SCENICVIEW P20W-3 Operating Manual page 25

The corresponding setting window (here: Image Adjust ) is displayed (on the right-hand side).
All changes are stored automatically.
If you want to change other settings, select the corresponding function from the OSD main menu. All
possible adjustments of the main menu are described in the following.
The OSD menu for analogue monitor operation is described in the following. During digital
i
operation some functions are not available, as they are not required due to the digital
transmission technology used.
Adjusting the brightness and contrast
Calls up the Brightness / Contrast setting window
Setting the brightness of the display
Brightness
This function is used to change the brightness of the background lighting.
Setting the contrast of the display
Contrast
This function is used to modify the contrast of bright colour tones.
Setting the brightness of the display
Black level
This function is used to can modify the contrast of dark colour tones.
Auto brightness Automatic brightness control
This function is used to automatically control the brightness of the background
lighting using the light sensor.
On = The brightness is adjusted according to the ambient brightness
Off = The brightness is adjusted manually by the user.
Adjusting the signal level
Auto level
This function is used to automatically adjust the contrast.
Press the SELECT/MENU button to activate the function.
A26361-K1175-Z120-1-7619, edition 1
SCENICVIEW P20W-3/P22W-3
The first function ( Phase ) is highlighted.
► If necessary, press the
mark another function.
► Press the SELECT/MENU button to select
the highlighted function.
► Press the or
6
value for the selected function.
► Press the EXIT/AUTO button to exit the
function.
► If necessary, press the button
mark another function or press the
EXIT/AUTO button to return to the main
menu.
or button to
6 5
button to adjust the
5
or
6 5
to
17