Fujitsu Siemens Computers SCENICVIEW P20W-3 Operating Manual page 26

SCENICVIEW P20W-3/P22W-3
If the contrast is set too high, bright surfaces can no longer be distinguished from very
i
bright surfaces. If the contrast is set too low, the maximum brightness will not be achieved.
Selecting the application mode
Calls up the Mode setting window
Office presets (the settings for colour and sharpness can be adjusted)
Office
Photo presets ( colour, sharpness, saturation )
Photo
Video presets ( colour, sharpness, saturation )
Video
Adjusting the screen size and position
Calls up the Image adjust setting window
Eliminating picture interference
Phase
This function is used to fine-tune your monitor in order to eliminate picture
interference.
Adjusting the synchronisation settings
Clock
This function is used to adjust the picture width in order to eliminate vertical picture
interference.
Adjustment of the horizontal position
H-position
This function is used to move the picture to the left or to the right.
Adjusting the vertical position
V-position
This function is used to move the picture up or down.
Adjusting the sharpness of the picture for the photo and video modes.
Sharpness
Adjusting the colour saturation for the photo and video modes.
Saturation
Adjusting the screen size
Expansion
Full screen = selection of full-screen mode.
Keep aspect = maximum picture size without distortion of the ratio. (Only for PC
picture)
16:9 = 16:9 Widescreen format (video/TV picture only)
4:3 = 4:3 format (video/TV picture only)
18 A26361-K1175-Z120-1-7619, edition 1