The Griddle; Glide-Out Grill - Rangemaster Elan 110 User's Manual & Installation Instructions

Fig.5-5
ArtNo.331-0001Grill pan pulled forwards
Fig.5-6
ArtNo.331-0003 Grill frame out, no pan
Fig.5-7
ArtNo.331-0004 Removing the grill frame
Fig.5-8
ArtNo.331-0005 Removing the grill rail
Fig.5-9
ArtNo.331-0006 Grill pan plan

The Griddle

Always clean the griddle after use. Allow it to cool completely
before removing. Immerse the griddle plate in hot soapy
water. Use a soft cloth or, for stubborn stains, a nylon washing
up brush.
Note: If the griddle is washed in a dishwasher then some
dishwasher residue may appear on the back. This is normal
and will not a ect the performance of your griddle.

Glide-out Grill

Before you remove any of the grill parts for cleaning.
n n
make sure that they are cool, or use oven gloves.
The grill pan and grill pan carriage can be easily removed for
cleaning.
The grill pan and trivet should be washed in hot soapy water.
After grilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the trivet by using a nylon
brush.
Alternatively, the grill pan can be washed in a dishwasher.
The grill pan can be easily removed for cleaning as follows.
Remove the grill pan support frame by pulling the grill pan
forward (Fig.5-5).
Lift the grill pan clear of the support frame. The support frame
is held to the side rails by two clips on each side (Fig.5-6).
For each side, support the side rail with one hand and with
the other hand lift the frame up and out of the side clips
(Fig.5-7).
For safety, push the side rails back into the grill chamber.
If you need to remove the side rails to allow cleaning of the
grill chamber, you can unhook them from the grill chamber
sides (Fig.5-8) and wipe the sides clean with a soft cloth and
mild detergent.
DO NOT put the side runners in a dishwasher.
Once you have nished, hook the side rails back onto the
sides of the chamber. To re t the frame, pull the side rails
forward and, for each side in turn, support the side rail and
press the frame down into the side rails. Replace the grill pan.
When re tting the grill pan, make sure that the wide rim is at
the front (Fig.5-9).
16