Machine Maintenance & Storage - Viper BARRACUDA Owner's Manual

NOTE: Be sure the bag / filter is
properly placed in bag housing to
ensure proper air flow.
5) To remove bag, simply reverse steps 1-
4 above.
6) Do not re-use paper bag / filter. When
full, dispose of it and replace with a
new one.
MACHINE MAINTENANCE
To keep the machine performing well
for many years, please follow the
following maintenance procedures.
!!! Always confirm that the machine
is unplugged prior to performing
any maintenance or repairs!!!
1) Unplug machine as soon as you are
done using it.
NOTE: When unplugging machine, do not
pull cord around sharp edges or corners &
do not unplug by pulling on the cord.
2) Clean outside of machine with a mild
cleaner.
3) Check power cord for any damage. If
any damage is detected, replace the
cord immediately.
4) Check machine for any loose or
missing nuts and bolts and replace as
necessary.
5) Check paper bag / filter for fullness. If
it is full, replace with a new one.
6) Check vacuum motor filter and exhaust
filter for debris and clean as needed.
NOTE: Do not clean filters with water or
a cleaning solution. Clean by tapping of
debris or blowing with air.
7) Inspect brush for strands of carpet and
debris and remove as needed.
8) Inspect brush bristles for wear and
damage. Replace brush as needed.
9) Inspect gaskets and seals for air leaks
and replace as needed.
10) Check vacuum hose for clogs and holes
and replace as needed.
11) Check vacuum motor carbon brushes
every 250 hours. Replace brushes
when they are 3/8" or less in length.
NOTE: Vacuum motor damage caused
by worn brushes is not covered by
warranty.
MACHINE STORAGE
1) Prior to storing the machine, wrap up
power cord, check paper bag / filter for
fullness and replace if necessary.
2) Clean and / or replace filters.
3) Store machine in upright position in a
dry area, with the brush head off the
floor.