Recalling Measurements Stored In Memory - Oregon Scientific BPW810 User Manual

Lying Position your wrist on a support,
down cushion, or your thigh so that it is
parallel with your heart with the palm
facing up.
3. Relax your hand and press
voice message will remind you to relax and remain
still. Press again and it then begins inflating the
wrist cuff. Once the pressure reaches 180 mmHg, it
will slowly deflate until the measurement results
show on the LCD.
NOTE This unit can intelligently adjust the cuff
pressure and inflate to a higher-pressure level (>180
mmHg) when needed.
Your systolic and diastolic pressure readings flash on
the LCD, followed by MAP and pulse per minute
readings every 2 seconds. At the same time, your
measurement results and the blood pressure
classification will also be announced.
4. To repeat the announcement, simply press TALK /
5. If you want to save the record to memory, press
to turn on the unit. A
or User 2's memory accordingly.
The measurement is stored as the first (MEM 1) entry
in the user record you selected; the last entry (MEM
60) is dropped, and all the entries in between move up
1 digit (e.g. 58 becomes 59, and so on).
RECALLING MEASUREMENTS STORED IN
MEMORY
To view a history of User 1's records, press
To view a history of User 2's records, press
11
VOLUME.
or and the results will be saved to User 1's
.
.