View Records; Recalling Measurements Stored In Memory; Clear Records; Deleting A Single Record - Oregon Scientific BPU321OS User Manual

VIEW RECORDS

This monitor can store up to 100 records per user. The most
recent record (1) is shown first. Each new measurement is
assigned to the first (1) entry in the user record selected. All
other records are pushed back one digit (e.g., 2 becomes 3
and so on), and the last record (100) is dropped from the list.
For average morning / evening blood pressure readings to be
displayed, blood pressure has to measure for three consecutive
days at least twice in each time period (morning / evening).
For ease of reference, the date and time when the
measurement was taken is shown with each record.
Memory is kept even when the batteries become
exhausted and subsequently replaced.
RECaLLINg MEaSUREMENTS STORED IN
MEMORY
Ensure the monitor is off.
Select user:
• Press to view a history of User 1's records
• Press to view a history of User 2's records
View more records for the same user:
• Press the corresponding user button repeatedly
( or ) to see additional records (average
morning / evening if available or next record).
Press and hold corresponding user button
TIP
( or ) to quickly toggle through all the entries.
To alternate between different user's records:
Press or .

CLEaR RECORDS

When memory is full, flashes.
Apart from deleting an entire measurement history, there
is also an option to delete the latest measurement record.
This is useful if measurements have not been accurately
recorded and need to be recorded again.

DELETINg a SINgLE RECORD

1. When monitor is off, press
2. Press the corresponding user button repeatedly
( or ) to navigate to the record to be deleted.
The most recent record (1) is shown first.
NOTE
3. Press and hold
• Press to exit to the deletion mode.
• Press and hold
4. doNE dEL indicates the record has been deleted.
9
or to select user.
. dEL ONE displays and flashes.
again to confirm deletion.
Press & hold