Temporary Ringer Silencing; Temporary Tone Dialing; Find Handset; Multiple Handset Use - VTech CS6114 Complete User's Manual

Telephone operation

Temporary ringer silencing

When the telephone is ringing, you can temporarily silence the ringer of the
handset without disconnecting the call. The next call rings normally at the
preset volume.
To silence the handset ringer:
• Press OFF/
CANCEL
Ringer muted displays.

Temporary tone dialing

If you have pulse (rotary) service only, you can switch from pulse to tone
dialing temporarily during a call. This is useful if you need to send touch-
tone signals to access your telephone banking or long distance services.
1. During a call, press
2. Use the dialing keys to enter the number. The telephone sends
touch-tone signals.
3. The telephone automatically returns to pulse dialing mode after you end
the call.

Find handset

Use this feature to find all system handsets.
To start paging:
1. Press /FIND HANDSET on the telephone
base once and then release when the
telephone is not in use.
All system handsets ring and flash
2.
** Paging ** for 60 seconds.
To end paging:
• Press /FIND HANDSET on the telephone base once and then release.
-OR-
• Press /
FLASH
handset to stop the paging tone.
Do not press and hold /FIND HANDSET for more than four seconds.
It may lead to handset deregistration. If Not registered displays on the
handset, refer to Troubleshooting on page 29 to register the handset to
the telephone base.
Multiple handset use (for CS6114-2 only)
You can use both handsets at a time on an outside call.
To share an outside call:
• When a handset is already on a call and you would like to join the call,
press /
FLASH
• To end the call, press OFF/
base or charger. The call continues until all handsets hang up.
or MUTE/
DELETE
.
TONE
or any of the dialing keys (0-9,
on the other handset to join the call.
CANCEL
and then
TONE
or place the handset in the telephone
14
Ringer muted
10:15 12/25
PM
#
or ) on the