Alcatel XP50 User Manual

Alcatel XP 50
ENGLISH
1. PACKAGE CONTENTS
The package contains the following items:
• Alcatel XP 50 handset
• Alcatel XP charger
• AC power adaptor
• 1 NiMH rechargeable battery pack
• 1 User Guide
2. INSTALLING YOUR PHONE
2.1. Installing and Charging the Batteries
1) Slide down to open the battery compartment cover.
2) P lace the 1 supplied rechargeable battery pack as indicated. Pay
extra attention to direction of polarity.
3) Slide the battery compartment cover back.
4) Put the handset on the base and charge for 15 hours before using
the handset for the first time.
Notes:
1) Use only the supplied NiMH rechargeable battery pack.
2) If the handset will not be used for a long time, disconnect and
remove the Battery pack to prevent possible leakage
2.2. Connecting the Charger
Plug the AC adapter into a mains socket.
2.3. Registration
We can either use easy registration or manual registration
below:
Easy registration
1. Press and hold on your Alcatel XP1050 or XP2050 telephone
base for around 4 seconds until the light turns on (for Alcatel
XP1050) or Registering...Please wait shows (for Alcatel
XP2050), and then put the handset on your base (either XP1050
or XP2050) when it shows Put handset on BASE to register.
2. The handset displays Registering handset... on the handset.
It takes about 90 seconds to complete the registration process.
The handset displays HANDSET X Registered (X represents the
registered handset number assigned automatically). The light
turns off (for XP1050) or HANDSET Registered will show (for
XP2050) and the handset beeps when registration completes.
If registration fails, the handset shows Registration failed, then Put
handset on BASE to register. Then, you can try the registration
manually below.
Register an additional handset through the menu
1. Press MENU then or to select Settings.
2. Press SELECT then or to select Register, then press
SELECT.
3. The display will show "Press and hold PAGE button on BASE".
4. Press and hold on the telephone base for around 4 seconds
until the light turns on (for Alcatel XP1050) or Registering...
Please wait shows (for Alcatel XP2050), the handset display will
show "Registering handset...".
5. The handset will return to idle mode if the registration is successful.
3. GETTING TO KNOW YOUR PHONE
3.1. Handset Overview
13
12 1
2
11
3
4
10 5
6
9 7
8
1.
• Press to select a menu item displayed above the key.
• While in a menu: Press to select an item or save an entry or setting.
2.
• During a call: Press to mute/unmute the microphone.
• In editing/predialing mode: Press to clear a character/digit.
• In ringing: Press to suppress handset ringer.
• During message or outgoing message playback: Press to delete a
message or outgoing message.
3.
• In menu mode: Press to scroll up the menu items.
• During a call: Press to increase the volume.
• In idle mode: Press to access the phonebook list.
• While entering names or numbers in the phonebook: Press to
move the cursor to the left.
4.
• In menu mode: Press to scroll down the menu items.
• During a call: Press to decrease the volume.
• In idle mode: Press to access the call list.
• While entering names or numbers in the phonebook: Press to
move the cursor to the right.
5.
• During a call: Press to end a call and go back to idle screen.
• In menu/editing mode: Press to go back to previous menu.
• In menu/editing mode: Press and hold to go back to idle screen.
• Press and hold while the telephone is in standby mode to erase the
displayed messages (XX Missed calls and Download fail).
• In ringing: Press to suppress handset ringer.
6. ALPHANUMERIC KEYPAD, ,
• In idle / pre-dial / editing mode / during a call: Press to enter
characters / numbers.
7.
• During a call: Press to change the quality of the audio to best suit
your hearing.
8.
• In Idle mode: Press to access the redial list.
9.
• During a call: Press to turn on/off the speakerphone.
• In Idle mode/predialing mode/Redial list/Call list/Phonebook entry:
Press to make a call with speakerphone.
• During ringing: Press to answer a call with speakerphone.
10.
• In idle/pre-dialing mode: Press to make a call.
• In Redial list/Call list/Phonebook entry: Press to make a call to the
selected entry in the list.
• During ringing: Press to answer a call.
• Flashes quickly when there is an incoming fixed line call or when
the answering machine is recording a call.
• Flashes slowly when a fixed line call is on hold.
• During a call: Press to answer an incoming call when you receive a
call waiting alert.
11.
• Press to make or answer a mobile call.
• During a mobile call: Press to answer an incoming call.
• Flashes quickly when there is an incoming mobile call.
• Flashes slowly when a mobile call is on hold.
12.
• In main menu mode: Press to go back to idle screen.
13. CHARGE LIGHT
• On when the handset is charging in the base or charger.
3.2. Display Icons and Symbols
Display Description
icons
On steadily when the fixed line is in use or there
is an incoming fixed line call.
On steadily when a mobile line is in use or there
is an incoming mobile call.
There are Bluetooth connected devices on the active
devices list.
There are Bluetooth disconnected devices on
the active devices list.
On steadily when a wireless Bluetooth headset
is in use on the fixed line.
Indicate when the battery needs charging.
Flash when low battery power level is detected.
Battery is charging.
The speakerphone is in use.
On steadily if the fixed line and mobile ringers
are turned off. Flashes if either one ringer is
turned off.
Indicate when there are received new Voice
Message Waiting (VMWI) not yet read.
Disappear when all the voice messages have
been read. (Network service dependent)
Indicate when the telephone answering machine
(TAM) is turned on.
The answering machine is turned on.
On when new TAM messages are received.
New call list - Missed and new calls.
Microphone is muted.
4. USING YOUR PHONE
4.1. Change Language
1. Press MENU in idle mode to enter the main menu.
2. Press or to select Settings, and then press SELECT.
3. Press LCD language then press SELECT.
4. Select the desired language and press SELECT.
4.2. Connecting with Bluetooth
Refer to the user guide of Alcatel XP1050 or XP2050.
4.3. Make a Call
4.3.1. Make a Fixed Line Call
4.3.1.1. Preparatory Dialing
Enter the phone number and press or to dial the number. Press
to clear the entry.
4.3.1.2. Direct Dialing
Press or to take the line and enter the phone number.
4.3.2. Make a Mobile Call
You can connect a maximum of 2 Bluetooth enabled mobile phones
to the telephone base, but only one mobile phone can be used on a
mobile call at a time.
4.3.2.1. Preparatory Dialing
Enter the phone number and press to dial the number. Press to
clear the entry.
4.3.2.2. Direct Dialing
Press , then enter the phone number, then press DIAL.
4.4. Set Ringer Volume
1. Press MENU on the handset in idle mode.
2. Press or to select Ringers,
3. Press SELECT to choose Ringer volume.
4. Press or to select All lines, Home, Mobile-D1 or
Mobile-D2, then press SELECT.
5. Press or to adjust the ringer volume. You hear a sample of
each volume level while adjusting.
6. Press SET to save. You hear a confirmation tone.
OR
Press OFF to turn off the ringer, then press SET to save. The
handset displays Caller ID won't be announced. You hear a
confirmation tone.
4.5. Set Ringer Melody
1. Repeat step 1 and 2 in last section.
2. Press or to select Ringer tone, then press SELECT.
3. Press or to select All lines, Home, Mobile-D1 or
Mobile-D2, then press SELECT.
4. Press or to select the desired ringer melody.
5. Press SET to save your preference. You hear a confirmation tone.
5. PHONEBOOK
The fixed line phonebook stores up to 200 entries with up to 30 digits
for each phone number and 15 characters for each name.
Each of the downloaded phonebooks stores up to 1,500 entries with
up to 30 digits for each phone number and 15 characters for each
name.
5.1. Add a New Fixed Line Phonebook Entry
1. Press MENU on the handset in idle mode.
2. Press or to select Phonebook, then press SELECT.
3. Press OPTION to select Home.
4. Press SELECT to choose Add contact. The screen displays
ENTER NUMBER.
5. To enter a telephone number.
OR
Copy a number from the redial list.
• Press and then or or repeatedly to browse for a
number. Press INSERT to copy the displayed number.
6. Press NEXT, and then Press or to select one of the
following types:
• Home
• Mobile
• Work
• Other
7. Press NEXT. The screen displays ENTER NAME.
8. To enter the name, and then Press SAVE to confirm and the
screen shows Saved. You hear a confirmation tone.
5.2. Dial a Phonebook Entry
1. Search for the desired entry in the phonebook.
2. Press or to use the fixed line, or to use the mobile line.
6. TECHNICAL SPECIFICATIONS
Free Field Range Up to 300 metres*
Indoor Range Up to 50 metres*
Handset Battery Life 12 hours talk time**
(average values) 160 hours standby**
Electrical Connection/ Charger adaptor:
Charger Model No.: S004LV0600030
Input: 100-240 V/50-60 Hz/0.15 A
Output: 6 V DC/300 mA
Only use the adaptors supplied
with the telephone.
Batteries AAA battery pack – 2.4 V – 750 mA
Only use the batteries supplied
with the telephone.
Use any other type of battery
presents a risk of explosion.
Operating Temperature From 5°C to 40°C
* Values may vary according to environment.
** Depending on initial battery charge.
7. TROUBLESHOOTING
If you have difficulty with your phone, please try the suggestions
listed below.
As a general rule, if a problem occurs, remove the battery pack
from all the handsets in your installation for about 1 minute, then
disconnect and reconnect the power supply to the base and reinstall
the handset battery pack.
The PIN on the telephone base does not work
• The default PIN is 0000.
• If you have changed the PIN, it will appear on the handset in the
pairing process.
Phone does not work
• Make sure you installed the battery correctly.
• Check that the mains power is correctly connected.
Handset does not ring
• The ringer volume may be switched off.
• Check that the mains power of the base is correctly connected.
• Make sure the handset is registered to the base.
No display
• The battery may be flat, dead or incorrectly inserted.
• Recharge or replace the battery.
Handset displays "Out of range or no pwr at base"
• Is the handset registered correctly to the base?
• Check that the mains power of the base is correctly connected.
• Check that the handset is within range of the base.
• Is the battery low? Place the handset on the charger to recharge.
You hear the busy tone when you press
• Make sure the handset is in range of the base.
• Another handset registered to your telephone base may be on the
line.
The store where you bought your telephone can also provide you with
information and after-sales support.
8. SAFETY
In the event of an electrical hazard, the mains adapter acts as 230V
power isolating device. It should therefore, as a precaution, be
installed close to the appliance and be easily accessible. To disconnect
the device from the primary power source, the mains adapter must
be removed from the 230V AC/50 Hz socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power
failure, telephones that use cordless handsets will not work.
You will then be unable to make or receive calls in the event of an
emergency.
This is why we recommend that you also keep a conventional
telephone – one that doesn't require a power supply – as a backup.
! Do not use your telephone to notify a gas leak when standing
in the vicinity of the leak.
It is recommended that you avoid using this device during electrical
storms.
Do not attempt to open the batteries, as they contain chemical
substances. In the event of leakage, avoid contact with the skin,
eyes, nose and mouth. In the event of contact, rinse the affected part
for about twenty minutes with running water and seek urgent medical
attention. Clean the product with absorbent paper or a dry cloth and
contact your reseller for replacement batteries.
ATLINKS hereby declares that the following models conform to the
essential requirements and other applicable provisions of European
directive 1999/5/EC.
Alcatel XP50
9. ENVIRONMENT
This symbol means that your inoperative electronic
appliance must be collected separately and not mixed
with the household waste. The European Union has
implemented a specific collection and recycling system
for which producers are responsible.
This appliance has been designed and manufactured
with high quality materials and components that can be recycled
and reused. Electrical and electronic appliances are liable to contain
parts that are necessary in order for the system to work properly but
which can become a health and environmental hazard if they are not
handled or disposed of in the proper way. Consequently, please do
not throw out your inoperative appliance with the household waste.
If you are the owner of the appliance, you must deposit it at the
appropriate local collection point or leave it with the vendor when
buying a new appliance.
- If you are a professional user, please follow your supplier's
instructions.
- If the appliance is rented to you or left in your care, please contact
your service provider.
Keen to preserve the environment, ATLINKS has equipped this
appliance with a switching power supply, offering better energy
efficiency. The advantages include not only very low electricity
consumption, but also a more compact format than the conventional
power supply units used by the previous range.
The used batteries from your telephone (if it has batteries) must
be disposed of in compliance with current environmental protection
regulations. Comply with your local regulations.
Return your batteries to your reseller or dispose of them at an
approved recycling centre.
Help us protect the environment in which we live!
www.alcatel-business.com
ATLINKS Europe
22 quai Gallieni
92150 Suresnes- France
© ATLINKS 2013 - Reproduction prohibited.
The Manufacturer reserves the right to modify the specifications of
its products in order to make technical improvements or comply with
new regulations.
ALCATEL and ATLINKS are registered trademarks.
The Alcatel logo and Alcatel name are trademarks of Alcatel Lucent
and used under licence by ATLINKS.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc.
FRANÇAIS
1. CONTENU DE L'EMBALLAGE
Le coffert contient les éléments suivants:
• Alcatel XP 50 combiné
• Alcatel XP 50 chargeur
• Adaptateur secteur
• Cordon de ligne téléphonique
• 1 pack batteries NiMH rechargeable
• 1 guide utilisateur
2. INSTALLATION DE VOTRE TELEPHONE
2.1. Installation et chargement des batteries
1. Faites glisser le couvercle vers le bas pour ouvrir le compartiment
batterie.
2. Placez le pack batteries rechargeable fourni comme indiqué.
3. Faites glisser à nouveau le couvercle batterie pour fermer.
4. Mettez le combiné sur le chargeur pendant 15 heures avant
d'utiliser le combiné pour la première fois.
Remarque:
1. Utiliser uniquement le pack batteries rechargeable NiMH fourni.
2. Si le combiné ne sera pas utilisé pendant une longue période, le
débrancher et retirer le pack batteries pour empêcher toute
possibilité de fuite.
2.2. Connecter le chargeur
Branchez l'adaptateur secteur dans une prise de courant.
2.3. Association de combinés
Vous pouvez utiliser soit l'association simplifiée soit l'association
manuelle:
Association simplifiée
1. Appuyez et maintenez la touche sur la base du téléphone
Alcatel XP1050 ou XP2050 pendant 4 secondes environ jusqu'à ce
que l'icône s'allume (pour l'Alcatel XP1050) ou
Enregistrement. SVP attendre... s'affiche (pour l'Alcatel
XP2050). Ensuite placez le combiné sur la base (soit XP1050
ou XP2050) lorsqu'il affiche Placez le combiné sur BASE pour
enregistrer.
2. Le combiné affiche Enregistrement combiné... sur le combiné
et l'icône rouge sur la base du téléphone reste allumé. Le
processus d'association dure environ 90 secondes.
Le combiné affiche COMBINE X Enregistré ( X représente le
numéro du combiné attribué automatiquement).. L'icône
s'éteint (pour XP1050) ou COMBINE enregistré s'affichera (pour