Life Fitness Smart Series Owner's Manual page 19

Smart series recumbent lifecycle exercise bike
Table of Contents

Advertisement

5.2
A
CCESSORIES
A Water Bottle Holder (B) is located on the monocolumn of the bike. Additionally, an integrated Reading Rack (C) for
supporting a book or magazine is located at the base of the console.
5.3
C
H
ONTACT
EART
The hand pulse sensors (D) are a built-in heart rate monitoring system on the stationary handlebar. During a workout grasp
the hand pulse sensors to monitor your heart rate. We recommend using the heart rate chest strap provided with your con-
sole during workouts and using the hand pulse sensors to only occasionally monitor your heart rate when not using the
chest strap. In addition, to utilize heart rate controlled workouts the chest strap must be used. For the most accurate read-
ing, use a comfortable grip. The console will show a heart rate reading after 15 to 20 seconds.
Hand pulse sensors can work differently with different body types. With some individuals it can be very difficult to extract a
heart rate reading. Follow the below tips to improve the heart rate reading.
·
Remove your hands from the heart rate sensors and wait for the heart rate display to clear. Grasp sensors again.
·
Make sure hands are fully contacting the sensors.
·
Dry hands periodically during use.
·
Limit movement.
·
Clean hand pulse sensors.
Note: The heart rate hand pulse sensors provide an approximate heart rate value. The sensors are not medical devices
and should not be used in any type of medical application.
18
R
ATE
C
B
D

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lifecycle

Table of Contents