Reviewing Locked-Out Talk Group Ids; Clearing Talk Group Ids; Clearing All Talk Group Ids In A Single Bank - Grecom PSR-300 Owner's Manual

4. Press or
5. Press L/OUT to lock out the ID. lo changes to LO.
6. To remove the lockout from a trunking ID, manually select the ID memory,
and press L/OUT. LO changes to lo.
You can confirm the ID code while the scanner shows the text when the re-
ceived signal is a voice channel.
1. Press TEXT while the scanner is receiving the voice channel and indicating
the text name. The ID code appears as MOT: XXXXXX, etc.
2. Press TEXT again to cancel.
Delay Function in ID Indication Mode
You can set the ID delay function separate from the channel delay.
1. Press FUNC then •/DELAY while you are programming the trunked ID. Use
Up/Down keys to set ID Delay. ENTER key saves. 2.0 seconds appears.
2. Press or
3. Press ENT.
Note: When activated, ID delay watches the control channel command for the
delay time when the signal disappears from the voice channel.

Reviewing Locked-Out Talk Group IDs

You cannot clear all lockouts from a talk group at the same time.
1. Press PGM then TRUNK.
2. Press FUNC. Then L/OUT. The locked out ID appears. If the ID memory
bank has no locked-out ID, you hear the low beep tone.

Clearing Talk Group IDs

1. Press PGM then TRUNK.
2. Press FUNC,
3. Press FUNC then CL.

Clearing All Talk Group IDs in a Single Bank

You can clear all talk group IDs within a bank. This lets you quickly delete all
talk group IDs from a bank if you want to use the bank to store different data
(such as a new set of talk group IDs).
1. Press PGM.
2. Press TRUNK to enter a talk Group ID memory mode.
54
to select the ID memory.
to select None, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, or 4.0 seconds.
or to select ID memory.