Storing Trunking Frequencies Into Channels; Storing Text Tags; Assigning A Text Tag To A Channel - Grecom PSR-300 Owner's Manual

Storing Trunking Frequencies into Channels

1. Press PGM and FUNC then
2. Press TRUNK to enter into trunking mode.
3. Repeatedly press MODE to select Motorola, EDACS, or LTR.
4. Press PGM and select the channel number using
5. Enter the trunking frequency and press ENT.
6. Repeat Steps 4 and 5 to enter the other trunking group frequencies for EDACS
or additional control channel frequencies for Motorola systems.
7. If necessary, press MODE to change the receiving mode.

Storing Text Tags

You can customize your scanner by storing text tags (up to 16 characters) for
easy identification of channel transmissions, trunk IDs, or banks.

Assigning a Text Tag to a Channel

1. Press MAN, enter the channel number where you want to enter the text,
then press MAN again. M and the bank and channel number appear at the
2 line of the display (for example: M100).
nd
2. Press PGM. M changes to P.
3. Press TEXT. The cursor appears at the fourth line.
4. Enter the text using the numeral keys (see "Text Input Chart").
Note: If you make a mistake, press
to change.
For example, to identify amateur (ham) radio transmissions in the 6 meter range,
input "HAM 6m" as follows:
• "H" is the second letter associated with 4 on the keypad. Press 4 then 2.
• "A" is the first letter associated with 2 on the keypad. Press 2 then 1.
• "M" is the first letter associated with 6 on the keypad. Press 6 then 1.
• A space is entered by pressing •/DELAY.
• "6" is the sixth number associated with 1 on the keypad. Press 1 then 6.
• "m" is the first letter associated with 6 on the keypad. Press 6 and FUNC (for
the lowercase set), then press 1.
5. Press ENT to input the text.
24
or to select the desired bank to program.
or to move to the character you want
or .