Table of Contents
Advertisement
01GB00TMEM860.book Page 7 Monday, October 16, 2006 1:50 PM
TV Operation (Optional)
Operable when optional TUE-T252TX is connected.
When TV is selected in "Setting the AUX Mode" (page XX), the source
is displayed in SOURCE selection screen.
Touch the display panel to display the operation screen.
• The operation screen changes to the visual screen in the TV mode for
5 seconds after an operation has been performed. Touch the display
panel to display the operation screen again.
CH
Decreases channels one by one.
P. DN
Decreases the preset numbers one by one.
TUNE
Changes the tuning way (manual mode, auto seek mode
and preset number).
CH
Increases channels one by one.
P. UP
Increases the preset numbers one by one.
A. MEMO
Memorizes automatically.
BAND
Changes the band.
SOURCE
Displays the source selection screen.
Hangs up the mobile phone connection. The indication is
displayed only during a call.
• Operation may differ depending on the connected device. Refer to
owner's manual of the connected device.
01GB05TMEM860.fm
Hands-Free Phone
(Optional)
About Hands-Free Phone
®
The unit is compatible with Bluetooth
communication technology. You can place a hands-free call* using a
Bluetooth compatible mobile phone.
* To make a hands-free call, your mobile phone needs to conform to
HPF (Hands-Free Profile) or HSP (Headset Profile).
• Avoid performing a hands-free call in a city where traffic is
congested, or in the narrow street.
• When you place a call, speak loudly and clearly.
• Shut the windows before calling.
• If both persons use a hands-free call to each other, or you make a call
in a noisy location, you may have difficulty hearing the other
person's voice, or transmitting to the other person.
• Certain voices may sound unnatural, depending on the person using
the telephone, or on telephone line conditions.
• Depending on the mobile phone, you may not be able to use a hands-
free phone.
Connect a Mobile Phone
If a mobile phone is connected for the first time, register a mobile phone
by doing the following.
Bluetooth Setting
Refer to "Setting the Bluetooth Connection (Bluetooth)"
(page 13).
Refer to "Sending Name Information of the Unit (VISUAL
MODE)" (page 14).
Searching for a Mobile Phone
Refer to "Finding a Bluetooth Device Name (SEARCH DEVICE)"
(page 13)
Inputting a pass code (4-digit)
Input a 4-digit number of your choice.
Input a pass code (4-digit) on the Mobile Phone.
Input the same pass code number (4-digit) as the unit.
The connection is made.
• The Bluetooth setting is required for a mobile phone. See the
Owner's Manual of the mobile phone.
• To input a pass code in the mobile phone, see the Owner's Manual of
the mobile phone.
ALPINE TME-M740BT 00-00000Z00-A (EN)
international standard wireless
7
-EN
Advertisement
Table of Contents
