Table of Contents
Advertisement
01GB00TMEM860.book Page 13 Monday, October 16, 2006 1:50 PM
GENERAL Setup
Sound (Beep) Guide Function (BEEP)
ON (Initial Setting) / OFF
ON: Activate the Sound Guide mode.
OFF: Deactivate the Sound Guide mode. The sound guide beep will
not be produced when a button on the unit is pressed.
Adjusting the Brightness of the LED (LED BRIGHTNESS)
HIGH (Initial Setting) / LOW / NORMAL / OFF
You can set LED brightness (POWER indicator, etc.).
HIGH:
Makes LED brighter.
LOW:
Makes LED darker.
NORMAL: Normal LED brightness.
OFF:
Turns LED off.
Change Sound Output(VOLUME CONTROL)
MONITOR (Initial Setting) / SYSTEM
If the unit is connected to the Vehiclehub Pro (VPA-B222R), set to
ON.
MONITOR: Outputs sound through the built-in speakers.
SYSTEM:
Volume is adjustable from the VPA-B222R if compatible
devices are connected to the VPA-B222R.
SYSTEM Setup
Hands-Free Phone Interruption Setting (INT MUTE)
ON (Initial Setting) / OFF
You can set a hands-free phone call to interrupt the head unit
(DVA-9861R, etc.).
ON: The received call or placed call interrupts the head unit. Audio
of the head unit is muted at this time.
OFF: The received call or placed call does not interrupt the head unit.
• IN-INT cable connected devices should be connected to the OUT-
ONT cable of the unit.
External Input Name Setting (AUX NAME)
OFF / DVB-T / TV / DVD HU / EXT. DVD / GAME / AUX (Initial
Setting)
Select the name from the following list, to be used for the product
using the external input mode. This will apply to the touch switch
name at source selection time and the source name during
playback change.
Setting the Navigation Mode (NAV. MODE)
NAV. (Initial Setting) / EXT. / OFF
OFF: Navigation source is not displayed. The settings related to the
navigation can not be changed from this unit.
NAV.:Navigation source is displayed.
EXT.: The source name is displayed as Vehicle Hub.
01GB05TMEM860.fm
Setting of the Rear Camera (CAMERA INT)
ON (Initial Setting) / OFF
When the rear camera is connected, rear pictures are output on
the screen.
OFF: The CAMERA source is not displayed on the SOURCE selection
screen.
ON: Even if the shift lever is not set to reverse (R), the rear pictures
are output by selecting the CAMERA source.
• By shifting to reverse (R), the rear pictures are output. This function
is effective when the reverse wire is properly connected.
Bluetooth Setup
Setting the Bluetooth Connection (Bluetooth)
ON (Initial Setting) / OFF
The setting is made when a hands-free phone or Bluetooth
Audio is used. Be sure to set to ON.
ON: The Bluetooth function can be used.
OFF: The Bluetooth function cannot be used.
Finding a Bluetooth Device Name (SEARCH DEVICE)
Search a currently connectable Bluetooth device
• If [CANCEL] is touched, search of the Bluetooth device is
terminated.
Observing Bluetooth Device Information (ACTIVE
DEVICE)
You can check the details of a currently connected Bluetooth
device.
• If [DISCONNECT] is touched, the Bluetooth device is disconnected.
ALPINE TME-M740BT 00-00000Z00-A (EN)
13
-EN
Advertisement
Table of Contents
