Operations; Test Run - Grizzly G1128 Instruction Manual

SECTION 6: OPERATIONS

Test Run

Before you test your Power Feeder, give it a
quick inspection.
1. Are all fasteners tight?
2. Are the mounting bolts secured to the
machine table top?
3. Is the power feeder oriented properly for the
type of job you will do?
4. Are each of the lock handles tightened
securely?
Once assembly is complete and adjustments are
done to your satisfaction, you are ready to test
the machine.
Do Not feed stock through at this time.
G1128/G1129 Power Feeders
Turn on the power supply at the main panel.
Press the START button. Make sure that your fin-
ger is poised on the STOP button, just in case
there's a problem. The power feeder should run
smoothly, with little or no vibration or rubbing
noises. Strange or unnatural noises should be
investigated and corrected before operating the
machine further.
WARNING: DO NOT attempt to investigate or
adjust the machine while it is running. Wait until
the machine is turned off, unplugged and all
working parts have come to a rest before you do
anything!
If noises occur that cannot be found by visual
inspection, feel free to contact our service depart-
ment for help.
-15-