Grizzly G1148 Parts List

15" bandsaw

Hide thumbs Also See for G1148:

Download this manual See also: Instruction Manual

15" BANDSAW

MODEL G1148

PARTS LIST

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC.

REVISED APRIL, 1999. PRINTED IN U.S.A.

PARTS LIST DISCLAIMER

This parts list and drawings represent the configuration of the machine as it is currently being shipped. The machine configuration can change as

product improvements are incorporated. If you own an earlier version of the machine, this parts list may not depict your machine exactly. Contact

Customer Service if you have any questions about part differences. Previous parts list versions are not available on-line.

Page 1: Parts List
PARTS LIST COPYRIGHT © 1994 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC. REVISED APRIL, 1999. PRINTED IN U.S.A. PARTS LIST DISCLAIMER This parts list and drawings represent the configuration of the machine as it is currently being shipped.
Page 2 220 volts. Please contact our Service Department for information and suggested switch if you are considering run- ning this machine at 220 volts. G1148 WIRE DIAGRAM 110 VOLT GREEN (GROUND) TO 110 VOLT POWER SUPPLY G1148 15" Bandsaw...
Page 3 MAIN BODY PARTS DIAGRAM G1148 15" Bandsaw...
Page 4 TABLE PARTS DIAGRAM G1148 15" Bandsaw...
Page 5: Stand Parts Diagram
STAND PARTS DIAGRAM G1148 15" Bandsaw...
Page 6 BLADE COVER PW06 FLAT WASHER " P1012044 TABLE INSERT P1148070 WORKING TABLE P1012046 TABLE PIN PB58 HEX BOLT "-16 x 2" P1012049 TRUNNION CLAMPSHOE G1148 15" Bandsaw " "-18 x " "-20 x " " ⁄ " I D " "...
Page 7 CAP SCREW P1148089 PLUG P1148090 FENCE CASTING P1148091 LOCK KNOB PB11 HEX BOLT P1148093 LOCK KNOB PN08 HEX NUT G1148 15" Bandsaw REF# PART# "-20 x " "-18 x 1 " "-16 x 3" "-20 x " "-18 x 1 "...