Table of Contents
Advertisement
Glossary
Q
quadrature counts
R
RAM
relative breakpoint
relative position
relative position mode
ribbon cable
RPM
RPSPS or RPS/S
RTR
S
s
servo
stepper
stepper <1..4> Dir (CCW) direction output or counter-clockwise direction control
stepper <1..4> Step (CW) stepper pulse output or clockwise direction control
T
toggle
torque
7344 Hardware User Manual
the encoder line resolution times four
random-access memory
sets the position breakpoint for an encoder in relative quadrature counts
The destination or target position for motion specified with respect to the
current location regardless of its value.
position relative to current position
a flat cable in which the conductors are side by side
revolutions per minute—units for velocity.
revolutions per second squared—units for acceleration and deceleration.
Ready to Receive
seconds
specifies an axis that controls a servo motor
specifies an axis that controls a stepper motor
changing state from high to low, back to high, and so on
force tending to produce rotation
G-8
www.natinst.com
Advertisement
Table of Contents
