Air Supply - Grizzly G0641 Owner's Manual

Air Supply

Required Air PSI ....................................... 70 PSI
Air Consumption ....................................... 4 CFM
Maximum Air PSI ...................................... 90 PSI
To connect the saw to compressed air:
1.
Connect a source of compressed air to the
air regulator-lubricator inlet valve on the back
(see Figure 11).
Air Inlet Valve
Figure 11. Air regulator-lubricator.
G0641 Double Miter Saw
2.
3.
Air
Pressure
Knob
Air
Pressure
Dial
Exceeding 90 PSI may result in unpredict-
able operation of the saw and damage to
the pneumatic system.
Lift up on the air pressure knob (see Figure
11), and turn it to adjust the air pressure dial
to 70 PSI, then push the knob down to lock
the setting.
Open the pneumatic access door on the right
side of the machine and set the air pressure
knob in a similar manner so that the air pres-
sure dial reads 70 PSI (see Figure 12).
Figure 12. Internal air regulator.
NOTICE
Air Pressure Knob
Air Pressure
Dial
-15-