Sunrise Medical Quickie RX Owner's Manual page 40

Lap belt instructions
Step 5
To secure the positioning belt to the
chair. Take one of the cable ties
supplied and thread through the
positioning belt strap. Then wrap
around the frame and fasten
together. DO NOT over tighten
positioning belt. Repeat steps 3-5
with both ends of positioning belt.
Step 6
To adjust the positioning belt use
the tri-glide buckles and the
fastening buckle.
Fastening buckle
Step 7
Generally the Lab Belt should be
fixed so that the straps sit at an
angle of approximately 45°, and
when corretly adjusted should not
allow user to slip down in the seat.
Step 8
When fastened check space
between belt and user, when
correctly adjusted it should be
possible to insert the flat of the
hand between the beld and user.
RX/RXS
Tri-glides
36
Step 5
Step 6
Step 7
Step 8
Issue 5