Sunrise Medical Quickie RX Owner's Manual page 37

Chair adjustments
Chair height adjustment
Two-hole castor forks (Fig. 44)
allow you to interchange 127mm
(5"), 152mm (6") and 203mm (8")
castor wheels and to adjust the
seat height. To adjust, remove the
13mm A/F axle bolt (1) and nut (2)
with 13mm A/F spanners and
remove the castor wheel (3). Either
change the castor wheel size and/
or position the castor wheel upward
or downward in the desired pre-
drilled holes (4) 25mm (1") apart on
the castor fork (5). Replace the bolt
and tighten to 27Nm torque. Follow
castor angle adjustment on
page 32, Fig. 42.
Inside mounted castors
To inside mount the castors
(Fig. 45), reverse the positions of
the castor assemblies. Remove the
castor assemblies (1) from the
frame (noting their positions).
Inside mount the right castor on the
left side and the left castor on the
right side. For correct refitting follow
the instructions on page 32, Fig. 42
(Castor angle adjustment),
ensuring that the castors are at the
correct angle and the retaining nuts
and bolts are tightened to the
correct torque setting 8-10Nm.
Issue 5
2
3
Fig. 44
1
Fig. 45
33
5
4
1
RX/RXS