Antec NeoPower 650 Blue User Manual page 2

User's Manual
NeoPower™ 650 Blue
High efficiency modular power supply
The NeoPower™ 650 Blue features ATX12V version 2.2/ EPS12V specifications.
NeoPower® 650 Blue has increased output power distribution to match the newest
Intel® and AMD processor requirements.
Furthermore, it includes three +12V outputs that deliver safer and more reliable
power to your system's components. NeoPower™ 650 Blue generate less heat
because of high efficiency technology and thus keep the power supply itself cooler
and prolong its working life. It also includes a variety of industrial-grade protective
circuitry: OPP (Over Power Protection), OVP (Over Voltage Protection), and SCP
(Short Circuit Protection), UVP (Under Voltage Protection).
Special Quiet Computing™ fan operation
NeoPower® 650 Blue feature an innovative design to help decrease noise during
normal use, but still allow for superior cooling capabilities as loads increase. With
its high efficiency and low heat generation, the power supply utilizes a 12 cm
fan. The fan rotates slowly and quietly to blow hot air out of the power supply,
speeding up as heat increases. The NeoPower® 650 Blue feature Universal Input,
which allows you to connect the power supply to any AC power source between
100~240V without having to worry about setting a voltage switch. This power
supply also features Active PFC, which improves the power factor value of the
power supply by altering the input current wave shape and thus helps transmission
across the power grid.
Advanced cable management system
NeoPower® 650 Blue feature Antec's advanced cable management system, which
allows you to use only the power cables that you need, thereby reducing clutter
and improving airflow inside your case. Inside the package, apart from a power
cord, you will find the following:
1. The 24-pin main power connector with detachable 4-pin section for 20-pin
applications.
2. The 8-pin +12V connector and 4-pin +12V connector as standard.
3. One 8-pin with detachable 2-pin PCI-E connectors
4. Five 6-pin output sockets, for use with the cable sets to power your drives
and other peripherals.
Modular Cable Set
1. There will be two sets of cables with three standard 4-pin molex peripheral
connectors at one end and a 6-pin PSU connector at the other end.
2. One Y-adapter with one standard 4-pin Molex peripheral connector at one end
and two female floppy power connectors at the other end.
1