Midi Dump - GEM Real Piano RP90 Owner's Manual

9. MIDI Dump

Using the MIDI Dump feature, you can send all of the information currently
held in the instrument's User Preset section to an external storage device
such as a MIDI sequencer, data filer, etc.. Refer to the owner's manual
of your MIDI software, sequencer or data filer for instructions on how to
receive MIDI dumps from other equipment.
Here's the procedure for sending a MIDI dump:
1. Connect a MIDI cable between the RP90 MIDI OUT and the storage
device's MIDI IN.
2. Access the MIDI DUMP function from the General button and press
PAGE UP several times until the correct display appears:
3. Press the DATA + button to select "ON":
4. Press the Page Up button to get the instrument ready for the
transmission:
5. Prepare the storage device to receive a MIDI Dump.
6. Respond to the "Ready for dump - press ^ to start" message by
pressing Page UP once more.
Dump in progress
You will see the dump progress screen until the dump is complete.
The time taken for a MIDI dump depends on the amount of data
being transferred.
When the MIDI dump has finished, the display returns to the starting
display.
At this point, you can proceed with the selection of the next General
function.
9 MIDI DUMP
OFF
9 MIDI DUMP
ON
Ready for Dump !
Press ^ to start
Dump in progress
....
1 '''''
9 MIDI DUMP
OFF
30
51