Midi Channel - GEM Real Piano RP90 Owner's Manual

2. MIDI Channel

This function allows you to change the "primary MIDI channel" for the
instrument, regardless of the keyboard status (single, layer or split).
Pressing Page Up shows the following display:
This is both the send and receive channel for the Single section of the
current Preset across the entire keyboard.
The MIDI Channel of the secondary sections (Layer or Split) is automati-
cally controlled by the MIDI Mode function explained afterwards.
Use the DATA +/– buttons to select the MIDI channel, from 1 ... 16:
2 MIDI CHANNEL
02
When you reach channel 16, the next value is OFF; this disables the
instrument for MIDI transmission and reception:
The channel selection procedure is cyclic, therefore, from channel 1, you
can pass directly to the MIDI Off situation using the DATA – button to
disactivate MIDI transmission/reception.
The last MIDI Channel selected is memorized, even after turning the
instrument off.
44
2 MIDI CHANNEL
01
2 MIDI CHANNEL
....
2 MIDI CHANNEL
OFF
16