8. Effect Parameter Editing - GEM Real Piano RP90 Owner's Manual

7 & 8. Effect Editing
Press the PAGE UP button to pass to the Effect Edit function.
The two pages which follow after the Efx. Send function will be different
depending on which Effect has been assigned to the current Preset.
The two Effect Editing functions affect all three sections of the current
Preset, therefore, only one screen for each parameter appears regard-
less of the status of the Single, Layer or Split mode:
The following table lists the available Effect Types and the two associated
parameters which can be modified:
Effect
1. Chorus
2. Tremolo
3. Phaser
4. Flanger
5. PitchShift
6. Delay 1
7. Delay 2
8. ChorusTremo
For example, the single Preset "GrandPiano" has been programmed to
play with the Chorus Effect.
From the table shown above, you can see that the first parameter
displayed for editing will be "Effect Depth" (the total amount of the
available Chorus).
Modify the first parameter value by using the DATA +/– buttons.
Press the Page Up button to pass to the second parameter, "Effect Rate":
Modify the second parameter value by using the DATA +/– buttons.
32
7 EFFECT DEPTH
'''
Type Parameter 1
Modulation Depth (amount of
modulation)
Modulation Depth
Modulation Depth
Modulation Depth
Frequency Coarse Tune (coarse tune
in semitone steps)
Delay Delay Time (the time it
takes for a repeat to
occur)
Delay Delay Time (the time it
takes for a repeat to
occur)
Modulation Depth
8 EFFECT RATE
'
4
Parameter 2
Rate (modulation velocity)
Rate
Rate
Rate
Fine Tune (fine tune of the
frequency in "cents")
Feedback (the number of
repeats heard before effect
fade out)
Feedback (the number of
repeats heard before effect
fade out)
Rate
1