Countdown - GEM Real Piano RP90 Owner's Manual

In this page you can activate/deactivate the Metronome (click).
The default setting is ON. Use the DATA – button to deactivate (Off) the
metronome.
The DATA + button reactivates the setting.

Countdown

Press PAGE Up to enter the last page of the Rec Control menu: Count-
down.
In this page you can activate/deactivate the countdown measure.
When you press PLAY to start your recording after activating the se-
quencer, the Countdown measure gives you a one measure lead into the
recording. No events are captured by the sequencer if you play during the
one measure countdown.
If you prefer to record without the countdown measure (ON by default),
press the DATA – button to deactivate the setting (Off).
Start playing as soon as you press PLAY to start the recording.
The RP90 Recording Studio (sequencer) is able to record the following
events:
• Keyboard and pedal data;
• Preset change data;
• Changes of the Preset balance settings;
• Activation/deactivation of the Layer and Split buttons;
Note: Once you have recorded your sequence, it is possible to play along
with the recording using a different Preset.
2 REC. CONTROL
CLICK METR. OFF
3 REC. CONTROL
COUNTDOWN
3 REC. CONTROL
COUNTDOWN OFF
ON
59