Strong SlimSat SA60 User Manual page 9

C- Azimuth:
peak, indicated on your screen. Once you sweep through the peak-signal point on the screen, mark the
position with a pencil and screw in your angle bracket to fix the antenna in this position.
The signal level and quality is indicated on the TV screen and will fluctuate and change colour according to the
adjustment & movement of the antenna while you are pointing & finding (azimuth, elevation and Skew angle).
The level indicates the power of the signal and the colour is the signal reception quality from the chosen satellite.
Once fine tuning is complete, and the signal is at its peak level with a good quality, you can stop
adjusting the antenna.
8
Finally obtain the area's azimuth angle of the chosen satellite, on
the lists in this manual, Point the antenna in a generally southerly
direction, then, by using the compass rotate to the right or the left
towards south on your compass (180°).
All of the European satellites are located to the south, there will be a
minor difference in the azimuth angle from one satellite to another.
Once you have selected the chosen satellite on your receiver follow the
signal strength on the screen by fine tuning the azimuth and rotating
the antenna very slowly "to the right" or "to the left" in order to receive
the highest signal level from the satellite.
You should be able to find the satellite signal first and then the signal
PART 1 • English