How To Install; Step 1: Where To Install - Strong SlimSat SA60 User Manual

PART 1 • English

3.0 HOW TO INSTALL?

By following the instructions step by step you can proceed easily to install SlimSat SA60 by yourself or
with the help of a professional antenna installer.
Before installing your antenna, you check that SlimSat SA60 box contains all the items listed above in the
'Box Content'. In the event of any missing parts, please contact your distributor.

3.1 Step 1: Where to Install?

In order to receive a signal from the Satellite, SlimSat SA60 is to be installed in an open loop space
(outside the house or the apartment), in the direction of the satellite towards the equator, for which, you
will need a compass to exactly orient SlimSat SA60 toward the satellite (Note; please take reference to
the table of the Azimuth angles specified in the back pages of this manual)
Note:
Think about the way you might pass your cable in a discreet way from the SlimSat SA60 to your Set top
Box. The antenna should not be too distant from your satellite receiver; a cable longer than 30 meters can
decrease the quality of the signal.
To ensure an accurate compass reading, stay away from large metal
objects, specifically electrical cables and then make multiple readings
Make sure that there are no obstacles in front of SlimSat SA60 which can decrease
the signal reception quality, such as buildings, or trees (you may keep in mind that
trees will grow and may block the signal).
In order to be able to fix and install your antenna easily you might choose an easily
accessible place without any potential danger for installation.
Bad Quality Signal Reception
3