Table of Contents
Advertisement
If you want to update one of the options a.) to c.) press OK at the corresponding menu item. If
required by the receiver, it may happen that there are selected additional menu items
automatically.
In line Information you can specify, if you want to receive further information on the selected
data (keys ◄ ►):
All :
Information on all available data
None:
Information on none of the available data
Software:
Information on the new software version.
OSD texts:
Information on the new menu texts.
Channel list :
Information on the new channel list.
Hint:
If you like to read these information before doing the update, please leave menu items a.) to
c.) inactive (
) and specify the desired information at d.). Then start downloading these data.
When received, you can view the information at menu items a.) to c.) by pressing the yellow
button. For leaving the corresponding on screen graphic use EXIT please.
3. starting the update:
The update-/download process is started as follows:
- select the desired data pressing OK at a.), b.) or c.) (mark changes from
- select None at menu line Information (keys ◄ or ►).
- Start the update procedure by pressing OK in line start download.
You are informed about the download process immediately when the first data are received.
As the reception of the data happens blockwise, several minutes may pass between the single
data blocks. When the first and second data block are received (100%), the data are stored.
The storage process is signalled by flashing the numbers in the LED display.
Please wait until all data blocks are received.
When the update is completed, the receiver automatically restarts and turns into Stand By
mode.
Attention:
As long as the storage process has not begun, the download can be cancelled by pressing
EXIT at any time. When the first data have been stored cancelling is no longer possible.
An interruption of the update process (e. g. by pulling the power cable) may damage the
operating software receiver and the receiver does not work any more!
Hint:
If the download includes a new channel list, the receiver needs to be reset to factory default
status for activating this list (after download is completed and receiver was restarted).
20
Installation
to
)
Hide quick links:
Advertisement
Table of Contents
