Settings - Parental Lock; Parental Lock - Device Lock; Parental Lock - Changing The Pin - Triax C-HD207 User Manual

Settings – Parental lock
Your receiver is equipped with a parental lock. This secures the receiver against unauthorised
use. When the parental lock is activated, the receiver can only be switched on after entering a
4-digit PIN code.
In the Main menu, use the ▲▼ buttons to move the cursor to the
line Parental lock and press the OK button.
Parental lock – device lock
To activate or deactivate the device lock, move the cursor to
the line Device lock and press OK. The following menu will
appear:
Use the ◄► buttons to switch the device lock on or of. When the lock is activated, the PIN
code must be entered when switching on the receiver.
Press EXIT to leave the menu. Use the ◄► buttons to choose whether you want to store the
changes made (Yes) or keep the previous settings (No). Confirm your choice with the OK
button.
Parental Lock – changing the PIN
To change the PIN code, move the cursor to the line
Change Pin and press OK. The following menu will appear:
The PIN code is set at the factory to 0000. Using the code 9976, the receiver can always be
switched on, regardless of what PIN code has been set.
Use the ▲▼ buttons to move the cursor to the line New PIN and press the OK button. Use
the 0-9 buttons to enter a 4 digit PIN code, the press OK. Use the ▼ button to move the
cursor to the line Confirm PIN and press the OK button. Now confirm your entry by entering
your chosen PIN code one more time, then press OK.
Press Exit to leave the menu. Use the ◄► buttons to choose whether you want to store the
changes made (Yes) or keep the previous settings (No). Confirm your choice with the OK
button.
WARNING
You must not forget the PIN code. Should this happen, please contact your specialist dealer!
Device Lock
Lock Device
Change PIN
New PIN
Confirm PIN
16
Settings
Parental Lock
Device Lock
Change PIN
No
* * * *
* * * *