Anchor Bolts - Toshiba G8000 SERIES Installation And Operation Manual

10.3

Anchor Bolts

Install the anchor bolts to secure the UPS on the floor. See Figure 10.2 for anchor bolt installation detail.
Use 12mm (1/2") diameter anchor bolts. There are 16mm (5/8") diameter holes provided in the UPS base.
See Figure 10.3 for the hole locations and dimensions for the specified UPS models.
4 x 5/16 in. (16 mm)
diameter screw holes
Anchor Bolt
FIGURE 10.2
ANCHOR BOLT INSTALLATION DETAIL
28
4 screw holes
(Side View)
G8000 Series with Isolated output Installation and operation manual
100 kVA
Back
4 X 1/2 in. Dia. (12 mm)
Front
29 11/16 in. (754 mm)
150 kVA
Back
4 X 1/2 in. Dia. (12 mm)
Front
46 1/16 in. (1170 mm)
FIGURE 10.3
HOLE LOCATIONS/DIMENSIONS
ON BOTTOM OF UPS
21 11/16 in.
(551 mm)
21 11/16 in.
(551 mm)