Toll-Free Calling From: U.S.A.: (888) 805-9837 Canada: (800) 997-4734 Mexico: 018005067866 Visit our web site for videos, FAQs and more: answers.schlage.com REGISTER YOUR PRODUCT Document your purchase and register your warranty at RegisterMySchlage.com, or use the included registration card. WARRANTY AND FCC/IC STATEMENTS...
LOCK SETUP Follow these steps to get your lock set up and ready to use. Decide if you want to use the Nexia Home Intelligence System. If you want to use the Nexia Home Intelligence System, see Nexia™ Home Intelligence Functions on page 12.
Thumbturn • Used to lock and unlock the door manually from the inside. Outside Schlage Button • Located on the outside of the door. • The first button you will press when entering a User Code and in the programming process.
LOCKING AND UNLOCKING L If you make a mistake while entering a User Code, press the Outside Schlage Button and start again. Locking from the Outside Unlocking from the Outside Press the Outside Press the Outside Schlage Button. Schlage Button The lock will lock.
Temporarily Auto-Lock must already be enabled. While the deadbolt is locked, Disable press the Outside Schlage Button and then enter a 4-8 digit User Auto-Lock Code to unlock the deadbolt. Within 5 seconds, manually lock and unlock the deadbolt using the thumbturn.
Page 7
If you change the User Code length after adding User Codes, all existing User Codes will be deleted! L If you make a mistake, press the Outside Schlage Button to leave Programming Mode, and then start over. Programming Mode will automatically time out after 30 seconds of inactivity.
Release after second flash (about 6 seconds) L If you want to silence an alarm early, press and hold the Inside Schlage Button until the alarm sound stops. L Want to hear what the alarm sounds like in Activity or Forced Entry mode? Enter an incorrect code four times and the alarm will sound.
Changing the Alarm Mode After you power on the alarm, it will be preset to the Forced Entry mode, by default. If you want to change the mode, follow these simple steps: L The alarm must first be powered on before changing the alert setting! Press and release the Activity button until the LEFT...
Ingersoll Rand (NYSE:IR) advances the quality of life by creating and SCHLAGE and our family of brands—including Club Car®, Ingersoll Rand®, Schlage®, Thermo King® and Trane® —work together to enhance the quality and comfort of air in homes and buildings; transport 00000000 and protect food and perishables;...
Page 11
DATE PROGRAMMING CODE USER NAME USER CODE Example: John Smith 1234...
3. While holding the Outside Schlage Button, reconnect the batteries. 4. Release the Outside Schlage Button. 5. To check that the lock was reset, press the Outside Schlage Button and enter one of the Default User Codes. If the reset was successful, the Default User Codes will unlock the deadbolt.
Page 13
1. Remove the battery cover. See Replacing the Batteries on page 5. 2. Disconnect the battery connector. 3. While watching the Inside Schlage Button, reconnect the battery connector. 4. The Inside Schlage button will blink if the lock is Enrolled.
1 beep Vacation Mode is enabled. Disable Green entered after Outside Vacation Mode. See Disable Vacation then Schlage button is Mode on page 7. pressed. 1 beep Too many incorrect User Codes have been 1 Red entered. Wait 30 seconds and try again.
Deadbolt requires two — Green Deadbolt/frame alignment is marginal. attempts to lock or Adjust door/frame for best operation. unlock. Browse to answers.schlage.com for help. Alarm will not sound. — — Turn on Alarm. Alarm sounds too Alarm — Sensitivity level is too high (at 1 or 2)
Page 16
Alarm to the store. Our representantes del Departamento de magasin. Les représentants du service Schlage Customer Service Servicio de Asistencia al Cliente de à la clientèle de Schlage sont à votre representatives are ready to Schlage están listos para ayudarlo. service. help.
Need help?
Do you have a question about the Touchscreen Deadbolt with Alarm and is the answer not in the manual?
Questions and answers