Table of Contents
Advertisement
• The frame rate and operability on the main viewer may decrease while a file is being
transmitted by the FTP client function.
FTP server name：Type the FTP server name to upload still images up to 64 characters, or
the IP address of the FTP server.
User name：Type the user name for the FTP server.
Password：Type the password for the FTP server.
Retype password：To confirm the password, type the same characters as you typed in the
Password box.
Passive mode：Set whether you use the passive mode of FTP server or not when connecting
to FTP server. Select On to connect to FTP server using the passive mode.
Alarm sending
Set to forward the image and audio file to the specified FTP server linked with the alarm
detection by the external sensor input or by the built-in motion detection function. Select On to
send the image and audio file to FTP server linked with the alarm detection.
Remote path：Type the path to the destination in FTP server up to 64 characters.
Image file name：Type the file name you want to assign to the images when sending to the
FTP server. You can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for
naming.
Sensor input 1：Click it on for using external sensor which is connected to sensor input1 of
the camera I/O port.
Sensor input 2：Click it on for using external sensor which is connected to sensor input2 of
Advertisement
Table of Contents
