Load Settings - Mitsubishi Electric DX-TL4509E Quick Start Manual

Load Settings

This item is used to update the menu settings of the DX-TL5000E via settings copied to external media.
NOTE: To load or change the menu settings stored on the external media, set the HDD settings
(partition setting) of this unit to the same settings as the recorder which has been used for copying
the menu settings.
When these settings are different between this unit and the recorder which has been used for copying,
the menu settings cannot be updated.
When loading settings with different Network A and B settings or a different language the POWER
TURNS OFF AUTOMATICALLY and the DX-TL5000E Reboots.
Press the SET UP Button on the front of the DVR
From the User Menu screen (000 000 000), press the D
(200 000 000) Press 5
(251 000 000) Press 1
(251 000 000)
NOTE: YOU HAVE TO STOP RECORDING BEFORE
YOU CAN EXECUTE
Press D Execute
Menu Data
Select the device
NEXT button to display the Setup Menu
Press 1 Load Menu Data
For USB press 2
Menu Setting Data is loaded should be
displayed
Press E Return and E Exit
47
Press E Return
twice to Exit Set Up