MOTION ALARM RECORDING
The Instructions for the SETUP Wizard have configured the DX TL5000E to record continuous; below
we will now cover how to program Motion Alarm Recording.
SETTING MOTION DETECTION AREA:
Two patterns independent from each other are available.
Pattern A and Pattern B.
Setup Menu
(200 000 000) Select 3
11
Camera Select
A
Motion Mask Settings
settings:
B
Sensitivity
is needed to activate motion (for any of the set areas if multiple areas have been activated).
C
Motion Threshold
D
Reference Interval Time
13
Test Mode
14
Copy Motion B
Motion Det
– Selects camera to be
configured for motion.
– Select and SET
Set to Default (as above)
Enable All
Disable All
Manual
– Select Sensitivity to change
– Select number of squares which
– Select time of how often the area set to motion will be sampled
– Select Test Mode to test the set area. The colour of the dot detecting motion
changes.
– This copies Motion B settings into the current Motion A settings.
Motion A Configuration
Select 1
Set Motion Detection Pattern A
Motion A Configuration
(231 000 000)
12