Related Manuals for SpeakerCraft NEAT! 8 Five
Summary of Contents for SpeakerCraft NEAT! 8 Five
- Page 1 OWNER’S MANUAL NEAT! In-Ceiling Speaker NEAT! 8 Five | NEAT! 8 Three | NEAT! 8 One NEAT! 7 Five | NEAT! 7 Three | NEAT! 7 Two...
-
Page 2: Speaker Placement
Prior to the actual installation of the speakers, it will be necessary to run cables to the speaker location from the amplifier. You will need to run at least 16 AWG cable from the amplifier to the speaker. See your Authorized SpeakerCraft dealer for more detailed information on cable installation. -
Page 3: Speaker Installation
Place this material back in place once the grille has been painted. SpeakerCraft recommends only light spray painting using 5 parts thinning agent to 1 part paint. Do not paint the grilles while... -
Page 4: Speaker Adjustment
(See Figure 4). ADJUSTING THE FREQUENCY RESPONSE (NEAT! 8 Five/Three and NEAT! 7 Five/Three/Two) The output of the woofer and tweeter on the NEAT! Five and Three can be adjusted to suit any environment. In general, we recommend leaving all of the adjustments at the flat (0dB) setting. -
Page 5: Specifications
SPECIFICATIONS NEAT! 8 Five NEAT! 8 Three NEAT! 8 One In-Ceiling Speaker In-Ceiling Speaker Speaker Type: In-Ceiling Speaker 8” Kevlar Cone Woofer 8” Aluminum Cone Woofer Low Frequency Driver: 8” Polypropylene Cone Woofer 1” Aluminum/ Magnesium 1” Aluminum Dome Tweeter High Frequency Driver: 1”... -
Page 6: Limited Lifetime Warranty
Contact your authorized SpeakerCraft Dealer for more information Should you have any questions regarding this, or any other SpeakerCraft product, please call our toll-free service hotline at 1-800-448-0976. We are available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.
Need help?
Do you have a question about the NEAT! 8 Five and is the answer not in the manual?
Questions and answers