●
Procedure
1. Connect the signal cable between a PC and the monitor, and turn on the PC.
2. Using the USB cable, connect the computer's downstream port and the monitor's upstream port 1.
3. Connect the USB cable between the USB downstream port of the PC and the USB upstream1 port of the
monitor.
Note
• By default, USB upstream port 1 is enabled. To connect two PCs, see
7-4. Showing Monitor Information
●
Displaying signal information "Signal Info"
This function displays the information about the current input signals displayed.
Procedure
1. Choose "Tools" from the Adjustment menu, and press
2. Choose "Signal Info" from "Tools", and press
The "Signal Info" appears.
(Example)
"3-8. Switching USB Port Automatically" (page
USB
USB
downstream
upstream
port
port
.
.
33).
47
Chapter7Reference