Chapter 4 Selfcorrection; Executing Selfcorrection - Eizo Color Edge CX240 User Manual

Chapter 4 SelfCorrection

This product is equipped with a built-in correction sensor. The conditions that have been adjusted using ColorNavigator
and the measurement device can be maintained.
As the adjustment targets or interval times for SelfCorrection are set in advance using ColorNavigator, the built-in
correction sensor automatically executes regular display correction.
Attention
• To execute SelfCorrection, it is necessary to set the correction details. Set the target value in advance using ColorNavigator.
Regarding ColorNavigator, see
Note
• SelfCorrection can also be executed when there are no computer signals being input.

4-1. Executing SelfCorrection

Procedure
1. Choose "SelfCorrection" from the Adjustment menu, and press
2. Choose "Execute" from "SelfCorrection", and press
The built-in correction sensor is activated, and SelfCorrection is executed.
Attention
• After selecting "Execute", aging may be executed before the built-in correction sensor is executed.
36
Chapter4SelfCorrection
"To use ColorNavigator" (page 10).
.
.