Using Gps Navigation Getting Acquainted; Setting Up Your Hp Ipaq; Setting Up Internet Access On Your Hp Ipaq; Using Hp Ipaq Quick Gps Connection Utility - HP iPAQ hw6500 User Manual

8 Using GPS Navigation
Getting Acquainted
Your HP iPAQ includes Global Positioning System (GPS) Navigation
technology; therefore it is capable of using GPS software applications that
are compatible with this device. The GPS technology on your HP iPAQ is
based on a worldwide system of GPS satellites orbiting the earth that
continuously transmit digital radio signals. These radio signals contain
data on the satellites' locations and their exact clock time and are used to
determine your location on the earth.
With your GPS capable device, you can use navigation software from
other third-party companies. For GPS navigation solutions recommended
by HP, visit www.hp.com/go/gpsnavigation. However, before you
purchase, download or install any GPS software, you must determine that
the application is compatible with this device. Check with the GPS
software supplier to see if their software is compatible with the HP iPAQ
hw6500 Mobile Messenger series.

Setting Up Your HP iPAQ

First follow the instructions in the printed
document until you complete creating a partnership with
your personal computer. This includes installing the Subscriber
Identity Module (SIM) and battery, synchronizing your HP iPAQ with your
personal computer, and establishing a partnership.

Setting Up Internet Access on Your HP iPAQ

Now that you have completed the steps in the Getting Started document,
verify you have Internet access on your HP iPAQ by visiting a web site such
as www.google.com
Internet, take your HP iPAQ out of the cradle and use a GPRS connection.
For details, refer to Chapter 7, in the section
Connection."

Using HP iPAQ Quick GPS Connection Utility

To improve connection performance, you need to enable the HP iPAQ
Quick GPS Connection Data Utility and download the latest data file. Even
though the GPS radio on your HP iPAQ is able to connect to the GPS
satellites without enabling the Quick GPS Connection Utility, it may take a
few minutes longer and even up to five minutes to locate the satellites if you
do not use this utility.
The default settings on the HP iPAQ Quick GPS Connection Utility are set
where the device cannot receive automatic updates unless you enable
the update feature.
or www.yahoo.com. If you cannot access the
Getting Started
"Creating a GPRS/EDGE
Using GPS Navigation 8–1