HP iPAQ hw6500 User Manual page 89

3. In the Services box, select the service you want to enable:
File Transfer, Information Exchange, Serial Port,
Personal Network Server, Hands free, or Dial-up
Networking Server.
4. The Service you select automatically enables the Service
settings. Tap on the appropriate check box to change these
Service settings to your preference.
5. Tap OK to return to the iPAQ Wireless screen.
NOTE: If you select Authorization required in the Service Settings,
you must authorize each connection. Your HP iPAQ will then always ask
you if the connection should be permitted.
Secure Connections using a Passkey or Bond
To establish a secure connection with another device, you can use the
passkey feature or an established bond. You can also add data encryption
to this type of security.
A passkey is a code you enter to authenticate connections requested by
other devices. The passkey must be known and used by both parties or the
connection will not be allowed.
To require a passkey or bond:
1. From the Today screen, tap iPAQ Wireless > Bluetooth >
Settings > Services tab.
Tap the tab for the service you want to enable: File Transfer,
2.
Information Exchange, Serial Port, Personal Network
Server, Hands free, or Dial-up Networking Server.
Select Authentication (Passkey) required.
3.
Select Encryption Required if you want to require all data
4.
exchanged between the devices to be encrypted.
Tap OK.
5.
Using Bluetooth 9–5