Editing Network Properties - HP iPAQ hw6500 User Manual

• To access the GPRS Settings, from the Start menu, tap Settings >
Connections tab > GSM/GPRS Manager icon. If your
operator name appears in the drop-down list, it is recommended
that you use that connection and, if needed, edit the
default settings.
NOTE: In the event the automatic detection setting fails, complete one of
the two following items:
Select the appropriate country and operator name, then tap OK.
•
The settings automatically update.
• If your operator name does not appear in the drop-down list, you
must manually add it to the list by tapping the down arrow in the
Operator box and tapping "Create New . . .". For more
information, refer to the
this chapter.

Editing Network Properties

CAUTION: Editing Network Properties is not recommended unless you
are being accompanied by service provider Help.
Tapping on the Edit network Parameters bar on the GSM/GPRS
Settings screen gives you access to the following areas:
•
•
Internet Connection Information—Walks you through the
different settings for GPRS (General Packet Radio Service) and
CSD (Circuit Switched Data) connections.
MMS Multimedia Messages—Allows you to modify the
Multimedia Message Service Center (MMSC) address.
"Creating a New Connection"
Using the Phone Features
section in
5–20