Headphones; Quick Start - Minelab Quattro MP User Manual

5. headphones

www.minelab.com
5. Headphones
The use of headphones while treasure hunting can reduce
the distraction of external noise and allow the operator to hear
softer target signals. While the use of headphones is not necessary
during operation, the reduced power demands of the headphones
will extend battery life.
The 1/4" socket for the headphone plug is
located in the top right of the rubber seal at
the top of the handle assembly. The headphones
may be plugged into this socket or unplugged at
any stage of operation.
We would recommend a comfortable feeling
headphone with a high (32+) ohm rating.
Minelab's Custom Koss headphones available as an
accessory are rated at 100 ohm.

6. quick start

6. Quick Start
• Simply turn on the Quattro MP by pressing the POWER button.
• On the initial start-up, your detector will default to the factory COIN mode.
• To select a different factory pre-set Detect mode, press and release the appropriate mode button.
• The icon next to the corresponding preset mode, indicates that a factory preset mode has
been selected. The detector will apply the factory determined discrimination pattern, and audio
response for that mode.
• Press the NOISE CANCEL button and wait the 20 seconds it takes to select the most
stable channel.
• Once the sound sequence is completed, you can start detecting!
p11