1180 I/O sub card with USB connector and audio jack
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 62
•
"1020 Large bottom cover" on page 63
•
"1040 Optical drive or blank bezel" on page 65
•
"1120 Keyboard" on page 76
•
"1130 Keyboard bezel" on page 80
Removal steps of I/O sub card with USB connector and audio jack
When installing: Make sure that the connector is attached firmly to the system board.
Step
Screw (quantity)
3
M2 × 5 mm, wafer-head, nylon-coated (1)
90
Hardware Maintenance Manual
Color
Torque
0.181 Nm
Silver
(1.85 kgf-cm)