Table of Contents
Advertisement
• Make sure that the fan connector is attached firmly.
• Make sure that the DC-in connector is attached to the system board firmly.
• Make sure that the rubbers
Important: For models with Instant Media Mode card, after you install a new system board, prior to installing
the Instant Media Mode card, make sure that you update the system board with the original MTM and serial
number of the computer. Otherwise, data on the Instant Media Mode card will be erased at power-on
stage if the MTM and serial do not match.
Applying labels to the base cover:
The new base cover FRU is shipped with a kit containing labels of several kinds.
Note: If the Windows Certificate of Authentication label (COA)
the old part with the label to the customer, or provide the customer with a note of the label information,
which includes label location, label name, label part number, serial number, and product key.
When you replace the base cover, you need to apply the following label:
17
Homologation label
The following labels need to be peeled off from the old base cover, and applied on the new base cover.
1
Non-encryption label (for non-TPM model) or Rating label (only for Indonesia)
3
IMEI BARCODE label for Ericsson F5521gw
4
IMEI BARCODE label for Gobi3000
5
SIM ICCID label
6
Wireless label for special bid
7
TW WWAN label
8
ISRAEL label
9
SIRIM label
10
Wireless card label (only for Brazil)
a
are attached on the system board when you install a new system board.
2
is attached to a part that is replaced, return
.
Chapter 8
Removing and replacing a FRU
83
Advertisement
Table of Contents
