Table of Contents
Advertisement
USB 1 and USB 2
Provides two USB Host ports to connect USB peripheral devices to the Phoenix 104. Power is provided on the USB
ports at 5VDC up to a maximum of 1 amp total for both connectors. Many types of devices are supported by the
USB ports including Keyboards, Flash Drives, external floppy and hard disks, Barcode Scanners, and many more.
COM 1 & 2
The Phoenix connects to RS-232 devices such as Barcode scanners, RFID readers, PC's or printers via two DB-9
male serial connectors with standard PC style pinout with the addition of power on Pin 9, either 5 VDC or 12 VDC,
up to a maximum or 1 amp total for both connectors. Factory default is 5V on COM1 and 12V on COM2.
Pin
Name
1
CD
2
RXD
3
TXD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
SPWR
Note: Direction is DTE (Computer) relative DCE (Modem).
Figure 2
Ethernet (104e only)
Connects the Phoenix 104e to 10BaseT/100BaseT full duplex standard Ethernet interfaces.
Power
Connects the Phoenix 104/104e to a vehicle's power (10-60VDC) or a AC/DC power supply
(F1_AC/DC_60W_M12
Pin #
1
2
3
4
DP_104_User Rev -
Dir
Description
IN
Carrier Detect
IN
Receive Data
OUT
Transmit Data
OUT
Data Terminal Ready
------
System Ground
IN
Data Set Ready
OUT
Request to Send
IN
Clear to Send
OUT
Power (None, +5V, +12V @ 1A max)
.
)
Function
Chassis Ground
+ Power, 10-60V
Ground
Cable Color
Brown
N/A
Blue
Black
Page 7
Advertisement
Table of Contents
