Launching An Application Automatically - Percon Phoenix 104 User Manual

Launching An Application Automatically

There are two ways to automatically launch your application when you perform a reboot on the Phoenix 104:
• Make sure your CAB file places a shortcut to your application in the \Windows\StartUp folder.
• Configure the AutoRun program to launch your application.
The Phoenix 104 contains a program called AutoRun.exe which automates operations such as launching other
processes. You can configure AutoRun.exe through the AutoRun data file, AutoRun.dat. This script file must be
located in the same directory as the program. AutoRun supports the following script commands in AutoRun.dat:
AutoRun handles quoted file names for the first parameter, which allows you to specify path names or file names that
contain white spaces. AutoRun only supports one set of quotes per command.
AutoRun Script Commands
Command
EXEC
CALL
CHAIN
RUN
LOAD
DP_104_User Rev -
Description
Launches a specified program and waits for it to finish (up to 10 minutes)
Processes a specified file of commands and returns.
Processes a specified file of commands and does not return.
Loads a specified program and executes it.
Loads a specified program and executes it.
Page 17