Table of Contents
Advertisement
Battery Charging and & Battery Safety
Charging
figure 1-4
Specification:
1．Input（AC） ： 100-240V
frequency：50Hz/60Hz
2．Output： 54.60 ± 0.2V
3．Charge current：1.8±0.2A
Charging (see figure 1-4)
Ensure bike is turned off and key is removed.
1．First connect to the battery charger to the charging socket located below the front of the seat or
under the front seat.
(Optionally, you can also remove the battery pack and charge outside of the bike if preferred)
2. Insert the power plug on the battery charger into power outlet
3.
While charging, the light on the battery charger will illuminate Red.
4. When fully charged, the light will illuminate Green.
5. NEVER CHARGE FOR OVER 8 HOURS. DAMAGE MAY OCCUR TO BATTERY
6. Always charge the bike in an enclosed area outdoors away from weather & wet conditions.
NEVER CHARGE THE BIKE INSIDE YOUR HOME
ONLY CONNECT THE BATTERY CHARGER LEAD TO THE BIKE. NEVER
CONNECT ANY OTHER POWER SOURCE TO THE BIKE.
14
Hide quick links:
Advertisement
Table of Contents
