Front Panel Header (J86); Gigabit Ethernet Disable (J87); Pci-X Slots 3 & 4 Bus Speed Override (J92); Sata (Serial Ata) Controller Disable (J112) - Fujitsu D1692 Technical Manual

Board Parts, Jumpers and Connectors

Front Panel Header (J86)

J86 Front Panel Header

Gigabit Ethernet Disable (J87)

J87 Gigabit Ethernet Disable
Open – (Default) Enable onboard LAN Controller
""
Closed – Disable onboard LAN Controller
""
PCI-X Slots 3 & 4 Bus Speed Override (J92)
J92 PCI-X Slots 3 & 4 Bus Speed Override
Open – (Default) Allows PCI 3 & 4 to operate at up to 100MHz
""
Closed – Force PCI slots 3 & 4 to operate in at a maximum 66MHz
""
Note: This jumper affects integrated Ethernet on the same bus

SATA (Serial ATA) Controller Disable (J112)

J112 SATA (Serial ATA) Controller Disable
Open – (Default) Enable onboard SATA Controller
""
Closed – Disable onboard SATA Controller
""

RCV (BIOS Recovery) (J7)

J7 RCV (BIOS Recovery)
Open – (Default)
""
Closed – Recovery mode
""
12
A26361-D1692-Z120-1-7619