Front Panel Pin Connector (Internal); Communication Connectors - Fujitsu D3358 Manual

Mainboard D3358

Front panel pin connector (internal)

Normally, a chassis has some control or signal wires can be connected onto a motherboard for hard
drive LED, Power LED, power button, and reset button; The front panel connector has been
implemented on D3358 for such purposes.
Pin 1 Pin 2

Communication connectors

USB 2.0 port (external)
Pin 1
Pin 1
USB 2.0 port (internal) – Internal/Front
Pin 1 Pin 2
Fujitsu
PIN Signal
1 HD-LED +
3 HD-LED -
5 GND
7 RST L
9 Chassis Detect WS L
11 Chassis Detect Baku L
13 LED1 + (for USB Security)
15 Power Button (only S5, does
not work in low power S5)
17 Speaker +
19 GND
21 Key
23 Speaker -
PIN Signal
1 VCC AUX (safe mode)
2 Data negative
3 Data positive
4 GND
PIN Signal
1 VCC AUX
3 Data negative Port X
5 Data positive Port X
7 GND
9 Key
PIN Signal
2 Power LED +
4 Power LED -
6 Power Button
8 GND
10 Key
12 GND
14 LED1 -
16 Power Button (only S5, does
not work in low power S5)
18 Password Skip
20 GND (0,1K)
22 GND (0,1K)
24 Recover BIOS
PIN Signal
2 VCC AUX
4 Data negative Port Y
6 Data positive Port Y
8 GND
10 NC
English - 21
57