G0473 Assembly
To assemble the sandblaster:
1.
Install the filter assembly with the screws and
nuts (Figure 1).
Figure 1. Filter installation.
2.
Install the gloves as shown in Figure 2.
Figure 2. Glove installation.
G0472/G0473/G0476 Sandblasters
3.
Install the bulkhead fitting with gasket. Attach
the air supply hose and suction hose to the
bulkhead fittings and suction pipe with hose
clamps (Figure
3).
Suction
Hose
Supply
Hose
Suction
Pipe
Washer
Figure 3. Blast gun assembly.
4.
Plug in the AC/DC adapter (Figure
Figure 4. Light assembly.
Bulkhead
Fitting
Seal
Washer
4).
-9-