G0472 Assembly - Grizzly G0472 Owner's Manual

G0472 Assembly

To assemble the sandblaster:
1.
Install the four legs onto the stand frame with
12 M6-1x20 screws and nuts (Figure 1).
Figure 1. Stand frame.
2.
Assemble the hopper assembly, the screen,
and the adhesive foam gasket in the order
2).
shown (Figure
Figure 2. Hopper and screen assembly.
3.
Set the cabinet onto the hopper and screen
assembly, and secure it with (12) M6-1 x 40
screws and nuts (Figure 3).
Figure 3. Cabinet and frame.
-8-
4.
Install the lamp and wiring with the M4-0.7 x
10 screws, washers, and nuts. Use the zip-
ties to lock the lamp to the two lamp supports
4).
(Figure
Figure 4. Electrical installation.
5.
Insert the air supply hose through the cabinet
grommet, and assemble the gun as shown
5).
(Figure
Figure 5. Gun assembly.
G0472/G0473/G0476 Sandblasters