Jumpers And Switches - Abit IT5A User Manual

Installing the Mainboard
® Jumpers and Switches
CCMOS : Delete the contents of the CMOS
This jumper is set on pins 1 and 2 at the factory in order for the
computer to function normally, so please do not change this setting. The
main feature of this jumper is to solve situations where the computer
crashes due to improper usage. For example:
All these errors are very serious, you must avoid them. But if you have
made one of these errors, this jumper can save your life. First turn off
the power supply and open the computer case. Place the jumper on pins
2 and 3 in order to save your computer. But if you use your computer
normally, you should not need to use this feature.
After you have deleted the CMOS information, the computer is saved, but you
still have to go back to the BIOS Setup menu, and reset one by one all the
specifications: CPU, date, hour, FDD and HDD parameters. etc., before your
computer will return to normal operation.
-You have forgotten the password you set.
-You have inappropriately changed the settings in the BIOS
menu.
-You want to change the flash BIOS version.
( 5 VSB POWER OFF )
2- 9